Rear Seat Armrest. Removal and Installation

Removal

1. 1
   Remove the rear seat cushion.
   Refer to: Rear Seat Cushion (501-10B Rear Seats, Removal and Installation).
2. 2
   1. Lift the rear seat latch handle.

   2. Fold down the rear seatback.

   

3. 3
   If equipped with seat heaters.
   Disconnect the seat heater electrical connector.

   

4. 4
   1. Lower the seatback.

   2. Rotate the seatback hinge locking lever rearward and release the seatback.

   3. Remove the seatback.

   

5. 5
   Unzip the seatback trim cover, release the seatback trim cover J-clips and remove the bolts.
   Torque: 89 lb-in (10 N·m)

   

6. 6
   Remove the rear seat armrest.

   

Installation

1. To install, reverse the removal procedure.