Windshield Washer Reservoir. Removal and Installation

Removal

1. 1
   Remove the cap.

   

2. 2
   Remove the right-hand fender splash shield.
   REFER TO: Fender Splash Shield (501-02 Front End Body Panels, Removal and Installation).
3. 3
   Remove the bolts, clips and the front underbody shield.

   

4. 4
   Remove the clips and set the front bumper cover aside.

   

5. 5

   NOTICE: Be prepared to collect the escaping fluid.

   Remove the windshield washer reservoir.
   

   1. If equipped.
      Disconnect the electrical connector.

   2. Disconnect the electrical connector.

   3. Remove the clips.

   4. Remove the bolts.
      Torque: 44 lb-in (5 N·m)

   5. Remove the windshield washer reservoir.

   

Installation

1. To install, reverse the removal procedure.