Ford Mustang Quiz
Manual Transmission, Clutch and Transfer Case

Disassembly

In this manual: Manual Transmission, Clutch and Transfer Case
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

1. NOTE: Mark the position of each gear shifter fork (7230).

Place the gear shift plates (7N232) and the gear selector interlock sleeve (7K201) in the neutral position to center the gear shift plates and the selector body (7302).

Selector Plate

2. Rotate the main shift control shaft (7358) counterclockwise and pull it rearward to access the pin. Remove the pin.

Selector Plate

3. Using a twisting motion, remove the main shift control shaft.

Selector Plate

4. Remove the gear shifter forks, the gear shift plates, the pin, the gear selector interlock sleeve, and the selector body.

Selector Plate

5. Remove the O-ring (N800037-S2).

Selector Plate

6. CAUTION: Note the orientation of the gear shift plate for assembly reference.

Remove the gear shift plate and the gear shift fork inserts (7L082) from the shifter forks.

Selector Plate

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.