Ford Mustang Quiz
Engine

Exhaust Gas Recirculation (EGR) Valve - Mach I

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Remove the air intake scoop. For additional information, refer to Section.

2. Remove the exhaust gas recirculation (EGR) valve.

1. Disconnect the EGR tube upper fitting.

2. Disconnect the vacuum hose.

3. Remove the two bolts and remove the EGR valve and gasket.

Exhaust Gas Recirculation (EGR) Valve - Mach I

3. CAUTION: Do not use metal scrapers, wire brushes, power abrasive disks or other abrasive means to clean the sealing surfaces. These tools cause scratches and gouges, which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.

Clean and inspect the mating surfaces.

4. To install, reverse the removal procedure.

  • Install a new gasket.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.