Ford Mustang Quiz
Engine

Ignition Coil - Coil On Plug

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal

1. Disconnect the battery ground cable (14301). For additional information, refer to Section.

2. Remove the air cleaner outlet tube (9B659). For additional information, refer to Section.

3. NOTE: One ignition coil is shown, and the others are similar.

Disconnect the connector from the ignition coil (12029).

Ignition Coil - Coil On Plug

4. Remove the bolt and the ignition coil.

Ignition Coil - Coil On Plug

Installation

1. NOTE: Verify the ignition coil spring is correctly located inside the ignition coil boot and there is no damage to the tip of the boot.

To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.