Ford Mustang Quiz
Steering System

Ignition Switch Lock Cylinder - Functional

In this manual: Steering System
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Disconnect the battery ground cable.

2. Remove the ignition switch lock cylinder (11582).

1. Insert the ignition key and turn to the RUN position.

2. Using a 1/8-inch drift, press the ignition switch lock cylinder release pin through the access hole while pulling out the ignition switch lock cylinder.

Ignition Switch Lock Cylinder - Functional

3. To install, reverse the removal procedure.

  • Verify ignition switch lock cylinder operation.
Ignition Switch Lock Cylinder - Functional

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.