Ford Mustang Quiz
Steering System

Steering Column Shaft

In this manual: Steering System
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. CAUTION: Do not allow the steering column shaft to rotate while intermediate shaft is disconnected or damage to the clockspring can result. If there is evidence that the steering column shaft has rotated the clockspring must be removed and recentered.

NOTE: Discard the steering column shaft pinch bolt and the lower intermediate shaft-to-steering gear pinch bolt. Do not reuse, install new bolts.

Remove and discard the steering column shaft pinch bolt and disconnect the intermediate from the coupling.

Steering Column Shaft

2. Raise and support the vehicle.

3. Remove the pinch bolt.

Steering Column Shaft

4. Disconnect the intermediate shaft from the gear and remove the intermediate shaft.

Steering Column Shaft

5. To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.