Ford Mustang Quiz
Suspension

Installation

In this manual: Suspension
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

1. Install the upper arm and bushing to the mounting bracket.

1. Position the arm and bushing.

2. Install a new nut and bolt. Do not tighten at this time.

Upper Arm

2. Connect the upper arm and bushing to the axle.

1. Position the arm and bushing.

2. Install a new nut and bolt. Do not tighten at this time.

Upper Arm

3. Raise the suspension until the shock absorber is compressed to the previously established alignment mark (curb height).

Upper Arm

4. Tighten the arm and bushing-to-mounting bracket bolt.

Upper Arm

5. Tighten the arm and bushing-to-axle bolt.

Upper Arm

6. Lower the suspension and remove the jack stand.

7. Lower the vehicle.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.