Ford Mustang Quiz
Suspension

Installation

In this manual: Suspension
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

1. CAUTION: Make sure the hardened washer is installed between the lower suspension arm and bushing and the shock absorber. Failure to do so can result in damage and failure of the lower suspension arm and bushing.

NOTE: The toe link bolt and nuts are of a torque prevailing design. A new bolt and new nuts must be installed.

NOTE: Use a new cotter pin.

To install, reverse the removal procedure.

Toe Link - Cobra
Toe Link - Cobra

2. Check wheel alignment. Adjust as necessary.

Toe Link - Cobra

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.