Ford Mustang Quiz
Exhaust System

Muffler - 3.8L

In this manual: Exhaust System
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Raise and support the vehicle. For additional information, refer to Section.

2. Support the rear axle with a suitable jack.

3. Remove the upper arm-to-differential bolt.

Muffler - 3.8L

4. Remove the nut and bolt and disconnect the rear shock absorbers (18124) from the axle housing.

  • Discard the nut.
Muffler - 3.8L

5. Lower the rear axle.

6. Remove the dual converter assembly flange nuts.

Muffler - 3.8L

7. Remove the exhaust pipe assembly (5232) from the rear exhaust hanger insulator (5260).

Muffler - 3.8L

8. Remove the exhaust hanger insulators.

Muffler - 3.8L

9. Remove the muffler (5230).

Muffler - 3.8L

10. CAUTION: Do not use oil or grease-based lubricants on insulators as they deteriorate the rubber.

NOTE: A soap-and-water solution will ease installation of the exhaust hanger insulators.

To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.