Ford Mustang Quiz
Exhaust System

Muffler - 4.6L (4V)

In this manual: Exhaust System
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Raise and support the vehicle. For additional information, refer to Section.

2. NOTE: RH side shown, LH side similar.

Remove the dual converter assembly nuts.

Muffler - 4.6L (4V)

3. Remove the RH exhaust hanger insulator (5260).

Muffler - 4.6L (4V)

4. Remove the LH exhaust hanger insulator (5260).

Muffler - 4.6L (4V)

5. Remove the RH intermediate exhaust pipe hanger insulator.

Muffler - 4.6L (4V)

6. Remove the LH exhaust pipe hanger insulator.

Muffler - 4.6L (4V)

7. Remove the RH exhaust pipe hanger insulator.

Muffler - 4.6L (4V)

8. Remove the LH exhaust pipe hanger insulator.

Muffler - 4.6L (4V)

9. Remove the RH and LH mufflers.

Muffler - 4.6L (4V)

10. CAUTION: Do not use oil or grease-based lubricants on the insulators as they deteriorate the rubber.

NOTE: A soap-and-water solution will ease installation of the exhaust hanger insulators.

To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.