Removal

1. Remove the A/C compressor (19703). For additional information, refer to Air Conditioning (A/C) Compressor-3.8L or Air Conditioning (A/C) Compressor-4.6L in this section.

2. Remove the bolt.

1. Hold the A/C disc and hub assembly (19D786) with the special tool.

2. Remove the bolt.

3. Remove the A/C disc and hub assembly and the A/C clutch hub spacer (19D648).

1. Thread an 8 x 1.25 mm bolt into the A/C clutch to force it from the compressor shaft.

2. Lift the A/C disc and hub assembly and the A/C clutch hub spacer from the compressor shaft.

4. Remove the pulley snap ring.

5. Remove the A/C clutch pulley (2E884).

6. CAUTION: Do not use air tools. The A/C clutch field coil (19D798) can be easily damaged.

Remove the A/C clutch field coil.

1. Note the location of the A/C clutch field coil electrical connector.

2. Install the special tool on the nose opening of the A/C compressor.

3. Install the special tool.

4. Remove the A/C clutch field coil.