Removal

1. Remove the A/C compressor (19703). For additional information, refer to Air Conditioning (A/C) Compressor-3.8L or Air Conditioning (A/C) Compressor-4.6L in this section.

2. Remove the bolt.

1. Hold the A/C disc and hub assembly (19D786) with the special tool.

2. Remove the bolt.

3. Remove the A/C disc and hub assembly and spacer (19D648).

1. Thread an 8 x 1.25 mm (0.05 in) bolt into the A/C disc and hub assembly to force it from the compressor shaft.

2. Lift the A/C disc and hub assembly and spacer from the compressor shaft.

4. Using the special tool, remove the shaft seal felt from the nose of the A/C compressor.

5. Clean the compressor nose area.

6. Insert the tip of the special tool into one of the snap ring eyes.

7. Rotate the special tool to position the tool tip and the snap ring eye closest to the A/C compressor shaft.

8. Pull the special tool up quickly while keeping the tool shaft against the side of the nose opening and remove the snap ring.

9. Engage the special tool into the inside diameter of the shaft seal.

10. Turn the tool handle clockwise to expand the tool tip inside the shaft seal.

11. Pull the seal from the A/C compressor.