Ford Mustang Quiz
Engine

Roller Followers

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read
1special tools

Special Tool(s)

 Compressor, Valve Spring 303-452 (T93P-6565-AR)

Removal and Installation

1. Remove the LH and RH valve cover. For additional information, refer to Valve Cover LH and Valve Cover RH in this section.

2. Position the piston of the cylinder being repaired at the bottom of the stroke and camshaft lobe at base circle.

3. Using the special tool, compress the intake valve spring and remove the roller follower.

Roller Followers

4. Using the special tool, compress the exhaust valve spring and remove the roller follower.

Roller Followers

5. Repeat Steps 2, 3 and 4 to remove all the necessary roller followers. Inspect roller finger followers and camshafts. For additional information, refer to Section.

6. To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.