Ford Mustang Quiz
Manual Transmission, Clutch and Transfer Case

Seal

In this manual: Manual Transmission, Clutch and Transfer Case
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read
3special tools

Special Tool(s)

Installer, Transmission Extension Housing Oil Seal 308-227 (T94P-7657-A)
Slide Hammer 100-001 (T50T-100-A)
Remover, Bushing 307-001 (TOOL-1175-AC) or Equivalent

Removal

1. With the vehicle in NEUTRAL, raise and support the vehicle.

2. CAUTION: Index-mark the driveshaft flange and pinion flange, and the driveshaft slip yoke and transmission output shaft.

Remove the driveshaft. For additional information, refer to Section.

3. Using the special tools, remove the extension housing fluid seal.

Seal

Installation

1. Using the special tool, install the extension housing fluid seal.

Seal

2. CAUTION: Align the index marks.

Install the driveshaft. For additional information, refer to Section.

3. Check the transmission fluid level, add fluid if necessary.

4. Lower the vehicle.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.