Ford Mustang Quiz
Manual Transmission, Clutch and Transfer Case

Synchronizers

In this manual: Manual Transmission, Clutch and Transfer Case
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Disassembly and Assembly

NOTE: This procedure applies to all synchronizer assemblies.

1. Scribe an alignment mark on the sliding sleeve and the hub for assembly reference.

2. Remove the sliding sleeve, then remove the synchronizer struts and the springs.

Synchronizers

3. Install the synchronizer struts and the springs.

4. CAUTION: Match the alignment marks made during disassembly. The sleeve and the hub have an extremely close fit. Hold the sleeve and hub square to prevent jamming. Do not force the sleeve onto the hub.

Install the sliding sleeve.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.