Ford Mustang Quiz
Engine

Spark Plugs

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Remove the ignition coil-on-plug. For additional information, refer to Ignition Coil-On-Plug in this section.

2. NOTE: Use compressed air to remove any foreign material from the spark plug well before removing the spark plugs.

NOTE: If an original spark plug is used, make sure it is installed in the same cylinder from which it was taken. New spark plugs can be used in any cylinder.

Remove the RH spark plugs.

Spark Plugs

3. Remove the LH spark plugs.

Spark Plugs

4. Inspect the spark plugs. Install new spark plugs as necessary. For additional information, refer to Section.

5. Adjust the spark plug gap as necessary.

Spark Plugs

6. To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.