Brake System
Switch - Traction Control
In this manual: Brake System
~1min read
Removal and Installation
1. NOTE: If the vehicle is equipped with an automatic transmission, position the shift lever in the 1 position before detaching the floor console finish panel.
Lifting from both sides, detach the floor console finish panel.

2. Disconnect the electrical connector and position the finish panel out of the way.

3. Reaching behind the center finish panel, push and detach the switch from the finish panel.

4. Disconnect the electrical connector and remove the switch.

5. To install, reverse the removal procedure.
Test yourself
A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?