Honda Civic Quiz
Electrical

Battery Removal and Installation

In this manual: Electrical
Accessories — 57Body — 310Chassis — 96Electrical — 15HVAC — 39Powertrain — 300Moonroof/Sunroof — 9Roof Drainage — 5Wiper Arm/Nozzle Adjustment — 1ELD Removal and Installation — 1Under-Dash Fuse/Relay Box Removal and Installation (KA KX models without Keyless Access System) — 1Under-Dash Fuse/Relay Box Removal and Installation (KA models with Keyless Access System) — 1
~1min read

Removal

  1. Battery Terminal - Disconnection

1.

Make sure the ignition switch is in LOCK (0).

2.

Disconnect and isolate the negative cable and battery sensor (A) from the battery.

NOTE: Always disconnect the negative side first.

3.

Disconnect the positive cable (B) from the battery.

  1. Battery

1.

Remove the battery setting plate (A) and the battery (B).

Installation

  1. Battery

1.

Install the battery (A) and the battery setting plate (B).

NOTE: Do not deform the battery setting plate by over-tightening the nuts.

  1. Battery Terminal - Reconnection

NOTE: If the battery performs abnormally, test the battery.


1.

Clean the battery terminals.

2.

Connect the positive cable (A) to the battery.

NOTE: Always connect the positive side first.

3.

Connect the negative cable and battery sensor (B) to the battery.

4.

Apply multipurpose grease to the terminals to prevent corrosion.

Test yourself

A quick Honda Civic quiz: every answer comes with an explanation and a link to the manual page.