Electrical

Battery Terminal Disconnection and Reconnection

~1min read

Removal

  1. Battery Terminal - Disconnection

1.

Make sure the ignition switch is in LOCK (0).


2.

Disconnect and isolate the negative cable and battery sensor (A) from the battery.

NOTE: Always disconnect the negative side first.


3.

Disconnect the positive cable (B) from the battery.


Installation

  1. Battery Terminal - Reconnection

NOTE: If the battery performs abnormally, test the battery.


1.

Clean the battery terminals.


2.

Connect the positive cable (A) to the battery.

NOTE: Always connect the positive side first.


3.

Connect the negative cable and battery sensor (B) to the battery.


4.

Apply multipurpose grease to the terminals to prevent corrosion.

Test yourself

A quick Honda Civic quiz: every answer comes with an explanation and a link to the manual page.