Honda Civic Quiz
Powertrain

Radiator Fan Motor Removal and Installation (K24Z7)

In this manual: Powertrain
Accessories — 57Body — 310Chassis — 96Electrical — 15HVAC — 39Powertrain — 300Moonroof/Sunroof — 9Roof Drainage — 5Wiper Arm/Nozzle Adjustment — 1ELD Removal and Installation — 1Under-Dash Fuse/Relay Box Removal and Installation (KA KX models without Keyless Access System) — 1Under-Dash Fuse/Relay Box Removal and Installation (KA models with Keyless Access System) — 1
~3min read
  1. Air Cleaner Assembly

1.

Disconnect the intake air duct (A) and the intake air pipe (B).

2.

Remove the harness clamp (C).

3.

Remove the air cleaner (D).

  1. Battery Terminal - Disconnection

1.

Make sure the ignition switch is in LOCK (0), or the vehicle ignition in the OFF mode.

2.

Disconnect and isolate the negative cable with the battery sensor (A) from the battery.

NOTE:

Always disconnect the negative side first.

To protect the battery sensor connector (B) from damage, do not hold it when removing the negative terminal.

Do not disconnect the battery sensor from the negative terminal (C).

3.

Disconnect the positive cable (D) from the battery.

  1. Battery

1.

Remove the battery setting plate (A) and the battery (B).

  1. Battery Base

1.

Move the ECM without disconnecting the connectors.

2.

Remove the battery base.

  1. Front Grille Cover

1.

Remove the front grille cover (A).

2.

If necessary, remove the front bumper upper duct (A).

  1. Coolant Reservoir

1.

Disconnect the coolant reservoir hose (A).

2.

Remove the coolant reservoir (B).

  1. Radiator Mounting Bracket, Upper Both

1.

Remove the radiator mount upper brackets/cushions (A), and the A/C condenser upper mount brackets (B).

  1. Bulkhead - Removal

1.

Disconnect the connectors (A).

2.

Remove the harness clamps (B).

3.

Remove the bulkhead (A).

  1. A/C Condenser Fan Shroud Assembly

1.

Remove the A/C condenser fan shroud assembly (A).

  1. Radiator Fan Shroud Assembly

1.

Remove the radiator fan shroud assembly (A).

  1. Radiator Fan

1.

Remove the radiator fan (A) from the radiator fan motor (B).

  1. Radiator Fan Motor

1.

Remove the radiator fan motor (A) from the radiator fan shroud (B).

  1. Radiator Fan Motor

1.

Install the radiator fan motor (A) to the radiator fan shroud (B).

  1. Radiator Fan

1.

Install the radiator fan (A) to the radiator fan motor (B).

  1. Radiator Fan Shroud Assembly

1.

Install the radiator fan shroud assembly (A).

  1. A/C Condenser Fan Shroud Assembly

1.

Install the A/C condenser fan shroud assembly (A).

  1. Bulkhead - Installation

1.

Install the bulkhead (A).

2.

Install the harness clamps (A).

3.

Connect the connectors (B).

  1. Radiator Mounting Bracket, Upper Both

1.

Install the radiator mount upper bracket/cushion (A), and the brackets (B).

  1. Coolant Reservoir

1.

Install the coolant reservoir (A).

2.

Connect the coolant reservoir hose (B).

  1. Front Grille Cover

1.

Install the front bumper upper duct (A).

2.

Install the front grille cover (A).

  1. Battery Base

mmdrum

1.

Install the battery base.

2.

Install the ECM.

  1. Battery

1.

Install the battery (A) and the battery setting plate (B).

NOTE: Do not deform the battery setting plate by over-tightening the nuts.

  1. Battery Terminal - Reconnection

NOTE: If the battery performs abnormally, test the battery.


1.

Clean the battery terminals.

2.

Connect the positive cable (A) to the battery.

NOTE: Always connect the positive side first.

3.

Connect the negative cable and the battery sensor (B) to the battery.

NOTE: To protect the battery sensor connector (C) from damage, do not hold it when installing the negative terminal.

4.

Apply multipurpose grease to the terminals to prevent corrosion.

  1. Air Cleaner Assembly

1.

Install the air cleaner (A).

2.

Install the harness clamp (B).

3.

Connect the intake air pipe (C) and the intake air duct (D).

Test yourself

A quick Honda Civic quiz: every answer comes with an explanation and a link to the manual page.