Body
Rear Door Glass Adjustment (4-door)
Removal
- Rear Door Power Window Switch Panel
 |
|
1. |
Remove the power window switch panel (A). |
|
- Rear Door Panel
 |
|
1. |
Remove the inner handle cap (A). |
|
 |
|
4. |
Remove the door panel (A). |
|
- Rear Door Plastic Cover As Needed
 |
|
1. |
Detach the harness clip (A). |
|
2. |
Remove the plastic cover (B) as needed. |
|
Adjustment
- Rear Door Glass - Adjustment
 |
NOTE: Check the door weatherstrip and the glass run channel for damage or deterioration, and replace them if necessary.
|
1. |
Place the vehicle on a firm, level surface when adjusting the door glass. |
|
2. |
Carefully lower the glass (A) until you can see the glass mounting bolts (B), then loosen them. |
|
3. |
Push the glass against the glass run channel, then tighten the glass mounting bolts. |
|
4. |
Check that the glass moves smoothly. |
|
 |
|
5. |
Raise the glass fully, and check for gaps. Also make sure that the glass (A) contacts the glass run channel (B) evenly. |
|
Installation
- Rear Door Plastic Cover as Needed
 |
|
1. |
Install the plastic cover (A). |
|
2. |
Install the harness clip (B). |
|
- Rear Door Panel
 |
|
1. |
Install the door panel (A). |
|
 |
|
2. |
Install the screw (A). |
|
 |
|
3. |
Install the screw (A). |
|
 |
|
4. |
Install the inner handle cap (A). |
|
- Rear Door Power Window Switch Panel
 |
|
1. |
Install the power window switch panel (A). |
|
?
Test yourself
A quick Honda Civic quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?