Honda Fit Quiz
Second generation (2007-2026)

Mainshaft Bearing and Oil Seal Replacement (M/T)

In this manual: Second generation (2007-2026)
First generation (2001–2008) — 118Second generation (2007-2026) — 923
5steps
~30min
2/5difficulty
Done 0 of 5
Special Tools Required
  • Driver Handle, 15 x 135L 07749-0010000
  • Bearing Driver Attachment, 37 x 40 mm 07746-0010200
  • Bearing Driver Attachment, 52 x 55 mm 07746-0010400
  • Adjustable Bearing Puller, 25пјЌ40 mm 07736-A01000B

  1. Remove the differential assembly.

  2. Remove the ball bearing (A) from the clutch housing (B) using the 25пјЌ40 mm adjustable bearing puller (C), and a commercially available 3/8''-16 UNF slide hammer (D).

  3. Remove the oil seal (A) from the clutch side.

    NOTE: Be careful not to damage the clutch housing while removing the oil seal.

  4. Drive in a new oil seal in from the transmission side using the 15 x 135L driver handle (A) and the 37 x 40 mm bearing driver attachment (B).

  5. Drive in a new ball bearing (A) in from the transmission side using the 15 x 135L driver handle (B) and the 52 x 55 mm bearing driver attachment (C).

Test yourself

A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.