Honda Fit Quiz
Second generation (2007-2026)

Change Lever Clearance Inspection (M/T)

In this manual: Second generation (2007-2026)
First generation (2001–2008) — 118Second generation (2007-2026) — 923
2steps
~12min
1/5difficulty
Done 0 of 2

  1. Measure the clearance between the change lever (A) and the select lever (B) with a feeler gauge (C). If the clearance is more than the service limit, go to step 2.

    Standard:

    0.05пјЌ0.35 mm (0.002пјЌ0.013 in)

    Service Limit:

    0.55 mm (0.021 in)

  2. Measure the groove width of the change lever.

    • If the groove width is not within the standard, replace the change lever.

    • If the groove width is within the standard, replace the select lever.

    Standard:

    13.00пјЌ13.15 mm (0.5118пјЌ0.5177 in)

Test yourself

A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.