Front Passenger's Weight Sensor Replacement (Part-2)

When tightening the TORX nuts (A), begin with ?, and tighten them in a crisscross pattern in two or more steps.

Connect the front passenger's weight sensor connectors (B).

NOTE: The sensor connectors with the white tape (C) connect to the front sensors.

Reassemble the front passenger's seat cushion cover/pad.

Reinstall the front passenger's seat.

Do the battery terminal reconnection procedure.

Clear any DTCs with the HDS.

Do the front passenger's weight sensor initialization.

Confirm proper SRS operation: Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.