Honda Fit Quiz
Second generation (2007-2026)

Cylinder Head Inspection for Warpage

In this manual: Second generation (2007-2026)
First generation (2001–2008) — 118Second generation (2007-2026) — 923
3steps
~18min
2/5difficulty
Done 0 of 3

  1. Remove the cylinder head.

  2. Inspect the camshaft.

  3. Check the cylinder head for warpage. Measure along the edges, and three ways across the center:

    • If warpage is less than 0.08 mm (0.003 in) cylinder head resurfacing is not required.

    • Maximum resurface is limited to the cylinder head height standard as shown.

    Cylinder Head Warpage

    Standard (New):

    0.08 mm (0.003 in) max.

    Cylinder Head Height

    Standard (New):

    119.9пјЌ120.1 mm (4.720пјЌ4.728 in)

Test yourself

A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.