Honda Fit Quiz
Second generation (2007-2026)

Transmission End Cover Park Lever Stop Inspection and Adjustment (A/T)

In this manual: Second generation (2007-2026)
First generation (2001–2008) — 118Second generation (2007-2026) — 923
3steps
~18min
2/5difficulty
Done 0 of 3

  1. Set the park lever in the P position.

  2. Measure the center-to-center distance (A) between the park pawl shaft (B) and the park lever roller pin (C).

    Standard:

    37.8пјЌ38.8 mm (1.49пјЌ1.53 in)

  3. If the measurement is out of standard, select and install the appropriate park lever stop (A) from the table.

PARK LEVER STOP

Mark

B

C

1

11.00 mm
(0.433 in)

11.00 mm
(0.433 in)

2

10.80 mm
(0.425 in)

10.65 mm
(0.419 in)

3

10.60 mm
(0.417 in)

10.30 mm
(0.406 in)

  1. After replacing the park lever stop, make sure the distance is within tolerance.

Test yourself

A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.