Honda Fit Quiz
Second generation (2007-2026)

Torque Converter Housing Countershaft Bearing Replacement (A/T)

In this manual: Second generation (2007-2026)
First generation (2001–2008) — 118Second generation (2007-2026) — 923
3steps
~18min
2/5difficulty
Done 0 of 3
Special Tools Required
  • Adjustable Bearing Puller, 25пјЌ40 mm 07736-A01000B
  • Driver Handle, 15 x 135L 07749-0010000
  • Oil Seal Driver Attachment, 58 mm 07JAD-PH80101

  1. Remove the countershaft bearing using the adjustable bearing puller (20пјЌ40 mm) and a commercially available 3/8 ''-16 slide hammer (A).

  2. Install the ATF guide plate (A).

  3. Install the new countershaft bearing (B) in the housing using the driver handle and the oil seal driver attachment (58 mm); install the bearing outer race surface in height (C) of 0.03 mm (0.001 in) above the housing surface (D). Do not install the bearing exceeding 0.03 mm (0.001 in) high from housing surface.

Test yourself

A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.