Honda Fit Quiz
Second generation (2007-2026)

Torque Converter Housing Mainshaft Bearing and Oil Seal Replacement (A/T)

In this manual: Second generation (2007-2026)
First generation (2001–2008) — 118Second generation (2007-2026) — 923
3steps
~18min
2/5difficulty
Done 0 of 3
Special Tools Required
  • Adjustable Bearing Puller, 25пјЌ40 mm 07736-A01000B
  • Driver Handle, 15 x 135L 07749-0010000
  • Bearing Driver Attachment, 62 x 68 mm 07746-0010500
  • Bearing Driver Attachment, 72 x 75 mm 07746-0010600

  1. Remove the mainshaft bearing and oil seal using the adjustable bearing puller (20пјЌ40 mm) and a commercially available 3/8 ''-16 slide hammer (A).

  2. Install the new mainshaft bearing until it bottoms in the torque converter housing using the driver handle and the bearing driver attachment (62 x 68 mm).

  3. Install the new oil seal flush with the housing using the driver handle and the bearing driver attachment (72 x 75 mm).

Test yourself

A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.