Audio-Navigation Unit Removal/Installation
NOTE:
When working on electronic components, make sure the work area is clean and dust free.
Make sure your hands are clean and free of oils and grease.
Take care not to scratch the dashboard and related parts.
Eject the disc before removing the audio-navigation unit to prevent damaging the CD/DVD player's load mechanism.
If you are replacing the audio-navigation unit, write down the audio presets (if possible), then enter them into the new audio-navigation unit.
There are two different audio-navigation unit trim levels:
With rear entertainment
Without rear entertainment
If you are substituting a known-good audio-navigation unit (with HDD), you must substitute the same trim level. For example, if the vehicle has rear entertainment, use a known-good audio-navigation unit for vehicles with rear entertainment. If you use the wrong audio-navigation unit, it may cause a diagnosis error.
If the audio-navigation unit is replaced or disconnected, a Map Matching must be done.
Make sure you have the 5-digit anti-theft code.
Remove the center middle panel.
Remove the passenger's middle panel.
Remove the center panel.
Remove the center lower console.
Remove the bolts (B) and the bolts (C), then pull the audio-navigation unit assembly (D) out.