Accessories

BSI Radar Unit Removal/Installation

4steps
~24min
2/5difficulty
010203040509.47N·mlb·ft
Tightening torque found on this page
Done 0 of 4
  1. Remove the rear bumper.

  2. Remove rear bumper side spacer B.

  3. Remove the BSI radar unit (A).

    1. Disconnect the 6P connector (B).

    1. Remove the bolts.

  4. Install the BSI radar unit in the reverse order of removal, and note these items:

    • Make sure the BSI radar unit surface is clean.

    • Do the BSI radar unit aiming inspection.