Body

Front Bulkhead Cover Replacement

3steps
~18min
2/5difficulty
Done 0 of 3

NOTE:

  • Take care not to scratch the front bumper or the body.

  • When prying with a flap-tip screwdriver, wrap it with protective tape to prevent damage.

  1. Remove the air intake scoop.

  2. Detach the clips, then remove the front bulkhead cover (A).

    NOTE: To release the clips, pry up on the center pin at the notch (B).

  3. Install the cover in the reverse order of removal, and note these items:

    • If the clips are damaged or stress-whitened, replace them with new ones.

    • Push the clips into place securely.