Body
Front Inner Fender Replacement
In this manual: Body
3steps
~18min
2/5difficulty
Done 0 of 3
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the body or the front bumper.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Remove the front wheel.
Remove the front inner fender (A).
Canada models: Remove the screws (B), then remove the front splash guard (C).
Remove the screws (D).
Remove the bolts (E).
Detach the clips (F, G, H).
NOTE: To release the clips H, pry up on the center pin at the notch (I).
Install the inner fender in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
Push the clips into place securely.
Was this page helpful?