Body
Instrument Visor Removal/Installation
In this manual: Body
4steps
~29min
2/5difficulty
1special tools
Done 0 of 4
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
Take care not to scratch the dashboard or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
Remove these items:
Center panel
Driver's vent panel
Adjust the steering column to the full tilt down position and to the full telescopic out position.
Gently pull out the instrument visor (A) to detach the clips (B, C), then remove it.
Install the visor in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
Push the clips into place securely.
Was this page helpful?