Accessories

RDS-TMC Antenna Amplifier Replacement

4steps
~24min
2/5difficulty
010203040509.47N·mlb·ft
Tightening torque found on this page
Done 0 of 4

SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.

  1. Remove the left C-pillar trim.

  2. Disconnect the connector (A) from the RDS-TMC antenna and the connector (B) from the RDS-TMC antenna amplifier (C).

  3. Remove the bolt (D) and the RDS-TMC antenna amplifier.

  4. Install the RDS-TMC antenna amplifier in the reverse order of removal.