Chassis
Removal
In this manual: Chassis
5steps
~30min
2/5difficulty
Done 0 of 5
Turn the ignition switch to LOCK (0).
Remove the air cleaner.
Disconnect the 10 mm brake lines (A) and the 12 mm brake lines (B) from the VSA modulator-control unit (C).
Disconnect the VSA modulator-control unit 32P connector (A) by pushing the lock (B) and pulling up the lever (C); the connector disconnects itself.
Remove the VSA modulator-control unit bracket mounting bolts (A), then remove the VSA modulator-control unit (B) with the bracket (C) from the body.
Remove the VSA modulator-control unit (A) from the bracket (B).
Was this page helpful?