Body

Special Tools Required

3steps
~23min
2/5difficulty
1special tools
Done 0 of 3
  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

  • Put on gloves to protect your hands.

  • Take care not to scratch the door.

  • Take care not to damage the door glass outer weatherstrip.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Remove the sliding door upper molding.

  2. Pull the top of the door rear sash outer trim (A) to detach the clips, and release the trim from between the door glass outer weatherstrip (B) and the door, then remove the trim.

  3. Install the trim in the reverse order of removal, and push the clips into place securely.