Body

Vertical and Horizontal Adjustment at the Rear

4steps
~24min
2/5difficulty
010203040501813N·mlb·ft
Tightening torque found on this page
Done 0 of 4
  1. Adjust the center roller (A), the front striker (B) and the rear striker (C).

    1. Loosen the center roller bolts (D).

    1. Move the door in or out until it is flush with the body, and up or down to equalize the gaps.

    1. If necessary, adjust the door cushion (E) to make the door fit flush with the body.

    1. Tighten all bolts securely.

  2. Set the female guides (A), and lightly tighten the bolts (B). Adjust the alignment of the guides by closing the door, then open the door and tighten the bolts.

  3. Make sure the door opens and closes smoothly, and locks securely.

  4. Check for water leaks.