Hyundai Elantra AD Quiz
Body Electrical System

Blind Spot Detection Indicator Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
4steps
~24min
2/5difficulty
Done 0 of 4

Removal

Blind Spot Detection Warning Indicator
  1. Disconnect the negative (-) battery terminal.
  2. Remove the mirror (A).

Installation

Blind Spot Detection Warning Indicator
  1. Install the outside mirror.
  2. Connect the negative (-) battery terminal.

Inspection

  1. Apply battery voltage to each terminal as shown in the table, and check that the mirror operates correctly.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.