Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Front Seat Belt Buckle Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
4steps
~24min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement

  1. Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")
  2. Disconnect the front seat belt buckle connector (A).
  3. Loosen the mounting bolt and remove the front seat belt buckle (A).

    Tightening torque: 39.2 ~ 54 N·m

  4. To install, reverse the removal procedure.
    • Make sure the connector is properly connected.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.