Radiator Grille Repair Procedures

Replacement

Wear gloves to avoid cutting your hands.

When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components. Use a plastic panel removal tool to remove the interior trim parts without damaging the surface. Be careful not to bend or scratch the trim and panels.

1. 1
   Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover")
2. 2
   Disconnect the front bumper wiring (A).

   

3. 3
   Remove the retaining bracket, then the front bumper absorber (A).

   

4. 4
   Using a screwdriver or remover, remove the radiator grille cover (A).

   

5. 5
   Loosen the radiator grille mounting screws.
6. 6
   Using a screwdriver or remover, pull the clip upward and remove the radiator grille (A).

   

   

7. 7
   To install, reverse the removal procedure.

   Replace any damaged clips (or pin-type retainers).