Repair Procedures

Replacement

Wear gloves to avoid cutting your hands.

When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components. Use a plastic panel removal tool to remove the interior trim parts without damaging the surface. Be careful not to bend or scratch the trim and panels.

1. 1
   Remove the floor console assembly. (Refer to Floor Console - "Floor Console Assembly")
2. 2
   Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")
3. 3
   Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
4. 4
   Remove the side cowl trim. (Refer to Interior Trim - "Side Cowl Trim")
5. 5
   Remove the lower center pillar trim. (Refer to Interior Trim - "Center Pillar Trim")
6. 6
   Remove the foot rest (A).
7. 7
   Remove the floor carpet assembly (B).
8. 8
   To install, reverse the removal procedure.

   Replace any damaged clips (or pin-type retainers).

   

   1. Front floor carpet assembly 2. Foot rest

   3. Foot rest bracket 4. Front tunnel trim