Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Trunk Lid Trim Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
4steps
~24min
2/5difficulty
Done 0 of 4

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • Be careful not to scratch the body surface.
  1. Lift the cover (A) using a flat-tip screwdriver.
  2. Loosen the mounting screw and remove the trunk handle (A).
  3. After loosening the mounting screw and clips, remove the trunk lid trim (A).
  4. To install, reverse the removal procedure.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.