Operation of the Function

To Set the Speed

1. Accelerate to the desired speed, which must be above 20 mph (30 km/h).

2. Press the Driving Assist button to set the desired speed. The set speed and Cruise () indicator will illuminate in the instrument cluster.

3. Release the accelerator pedal. The vehicle will maintain the set speed even when the accelerator pedal is not pressed.

Information

On a steep grade, the vehicle may slightly decelerate or accelerate when driving uphill or downhill.

To Increase the Speed

• Press the + switch up and release it immediately. The set speed will increase by 1 mph (1 km/h) each time the switch is operated in this way.
• Press the + switch up and hold it. The set speed shown in the instrument cluster will increase to the nearest multiple of ten first (multiples of five mph), and then increase by 5 mph (10 km/h) each time the switch is operated in this way. Release the switch when the desired speed is displayed, and the vehicle will accelerate to that speed.

To Decrease the Speed

• Press the - switch down and release it immediately. The set speed will decrease by 1 mph (1 km/h) each time the switch is operated in this way.
• Press the - switch down and hold it. The set speed shown in the instrument cluster will decrease to the nearest multiple of ten first (multiples of five mph), and then decrease by 5 mph (10 km/h) each time the switch is operated in this way. Release the switch at the speed you want to maintain.

To Temporarily Suspend the Function

Cruise Control will be suspended when:

• The brake pedal is pressed.
• Pressbutton.
• The shift lever is moved to N (Neutral).
• The vehicle speed drops below approximately 20 mph (30 km/h).
• ESC (Electronic Stability Control) is operating.
• Shifting to 2nd gear during Manual Shift Mode.

The set speed will be canceled, but Cruise () will remain on.

To Resume the Function

Press the + switch, - switch, orbutton.

If you press the + switch up or the - switch down, the vehicle speed will be set to the current speed shown in the instrument cluster.

If you press thebutton, the vehicle speed will return to the set speed.

The vehicle speed must be above 20 mph (30 km/h) to resume the function.

To Cancel the Function

Press the Driving Assist button to turn Cruise Control off. The Cruise () indicator will turn off.

Always press the Driving Assist button to turn Cruise Control off when it is not in use.

Information

If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist button to turn Cruise Control off. However, Manual Speed Limit Assist will turn on.

WARNING

Observe the following precautions when using Cruise Control:

• Always set the vehicle speed to the speed limit in your area.
• Keep Cruise Control turned off when the system is not in use to avoid accidentally setting the speed. Check that the Cruise ( ) indicator off.
• Cruise control does not replace proper and safe driving. It is always the driver's responsibility to drive safely and always be aware of unexpected and sudden situations that may occur.
• Always drive carefully to prevent unexpected and sudden situations from occurring. Pay attention to road conditions at all times.
• Do not use cruise control when it may be unsafe to maintain a constant speed:
  -- When driving in heavy traffic or when road conditions make it difficult to drive at a constant speed
  -- When driving on wet, icy, or snow-covered roads
  -- When driving on hilly or winding roads
  -- When driving in windy areas
  -- When driving with limited visibility (possibly due to bad weather such as fog, snow, rain, or sandstorms)