Hyundai Genesis DH Quiz
Body Electrical System

Parking Assist Sensor Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
8steps
~48min
2/5difficulty
Done 0 of 8

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front/rear bumper cover. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover")
  3. Disconnect the connector (B) from the parking assist sensor (A).
  4. Remove the sensor (A) by pulling both ends of the sensor holder (B).
  5. Remove the rear sensor (A) by pulling both ends of the sensor holder (B).

Installation

  1. Install the rear ultrasonic sensor after connecting the connector.
  2. Install the bumper cover.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.