Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Radiator Grille Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
6steps
~36min
2/5difficulty
Done 0 of 6

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover")
  2. Remove the retainer bracket (A), then the front bumper absorber (B).
  3. Remove the panoramic camera. (Refer to Body Electrical System - "Panoramic Camera".)
  4. Loosen the radiator grille mounting screws.
  5. Using a screwdriver or puller, pull the clip (A) upward and remove the radiator grille (B).
  6. Install in the reverse order of removal.
    • Make sure the connector is properly connected.
    • Remove all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.