Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
8steps
~48min
2/5difficulty
Done 0 of 8

Replacement
  • When removing the fender, wrap protective tape around the screwdriver or pry tool to prevent damage to components.
  • Wear gloves to avoid cutting your hands.
  1. Remove the front bumper. (Refer to Front Bumper - "Front Bumper Cover")
  2. Loosen the front wheel guard mounting screws and pin-type retainers.
  3. Loosen the mounting screws and pin clips and remove the rocker side trim.
  4. Remove the rocker molding. (Refer to Body Side Moldings - Rocker Moldings)
  5. Remove the front bumper side mounting bracket (A) after loosening the screw and bolt.
  6. Remove the side fender cover (A).
  7. Remove the fender assembly (A) after loosening the nut and bolts.
  8. Install in the reverse order of removal.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.