Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
5steps
~30min
2/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • Be careful not to scratch the body surface.
  1. Remove the engine room cover (A) and the partition cover (B).
  2. Disconnect the plug hole (A), loosen the nuts, and remove the wiper arm (B).

    Tightening torque: 22.6 ~ 26 N·m

  3. Disconnect the washer nozzle (A).
  4. Disconnect the clips, then remove the cowl top cover (B).
  5. Install in the reverse order of removal.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.