Body Electrical System
Repair Procedures
In this manual: Body Electrical System
4steps
~24min
2/5difficulty
Done 0 of 4
Removal
- Remove the front bumper cover. (Refer to Body - "Front Bumper Cover")
- After loosening each mounting bolt, disconnect the connector (C) and remove the low-pitched horn (A) and high-pitched horn (B).


Installation
- After connecting the horn connectors, install the high-pitched and low-pitched horns.
- Install the front bumper cover.
Inspection
- The horn relay on this vehicle is built into the metal core PCB of the relay block in the engine compartment.
|
Test yourself
A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
