Body Electrical System
Start/Stop Button Repair Procedures
In this manual: Body Electrical System
7steps
~42min
2/5difficulty
Done 0 of 7
Removal
- Disconnect the negative (-) battery terminal.
- Remove the driver airbag lower panel. (Refer to Body - "Crash Pad Lower Panel")
- Remove the Start/Stop button (A) from the center fascia panel after loosening the mounting clip.

- Disconnect the Start/Stop button connector.
Installation
- Install the Start/Stop button.
- Install the emergency pad lower panel.
- Connect the negative (-) battery terminal.
Test yourself
A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?